100TECH Marine Fuel Sending Unit 8" (240-33 ohms) Bundle Boat Fuel Level Gauge Marine(240-33 ohms)

100TECH Fule Sending Unit is the Direct Replacement for the Swingarm Sender for Better Durability and Reliability. 100TECH Fuel gauges allows the user to remotely monitor the liquid level in the tank. These level gauges will work with any level sender with the corresponding resistive output 240-33ohms. Specification of Fuel Tank Sending Unit Length: 8" Resolution Range: 21mm Mounting Methods: Standard SAE 5 hole pattern. Material:Body: SUS 316 Stainless Steel. Liquid Level Sender with American standard output (240 ohms at empty, 33 ohms at full) Voltage output available upon request. Current output available upon request. Customized output curve available upon request. Operational Temperature: -40°F ~ +85°F (-40°C ~ +85°C). Additional Information : Sending Unit Installation Guide Note: Please kindly pay attention to the product description, especially the resolution and length (the length of sender should be 1" less than the depth of the tank if tank is plastic and 0.5" less than the depth of the tank if tank is metal) before placing the order. The Substantial Flange can Seal the Tank Completely The 100TECH Marine Fule Sending Units are Widely Used in Marine, On-road, Off-road, Generator set, and Industrial Applications. The Electric Liquid Level Sending Unit Utilizes Reed Switch and Magnetic Field technology. In 100TECH Reed Switch Level Senders the Float is the Only Moving Part of the Sender, Thereby Minimizing Potential Mechanical Failures. Material:Body: SUS 316 Stainless Steel. Cable: PVC. Float: NBR. Mounting Methods: Standard SAE 5 hole pattern. Protection Rank: IP67. Output Signal: American Standard 240-33 ohms (240 ohms at empty , 33 ohms at full). Resolution Range: 10mm: 4”,5”，6”,6.5”,7”,7.5” 21mm: 8”,8.5”9”,9.5”,10”,10.5”,11”,11.5”,12”,12.5”,13”,13.5”,14”,15”,16”,17”,18”,19”,21”,24” Operational Temperature: -40°F ~ +85°F (-40°C ~ +85°C). Package Information: 1 x 1

• <b>[100TECH Fuel Sending Unit Features and Benefits] Made With OKI Reed Switch(Imported from Japan). SS Construction,SAE 5 hole Mounting Pattern, It's The Direct Replacement for OEM's Arm-Type Fuel Sender. </b> <br> The Advantage of This Sending Unit Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability.<br>
• <b>【 Gasket and Mounting Screws of Boat Fule Sending Unit 】</b><b>"Easy to install, easy hookup!"</b> <br> The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow. <br><b>Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal .</b> <br>
• 100TECH Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V
• ［GOOD Readability, Great Visual Contrast on Gauge Face.］ The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• <b>Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.</b>