MeLphi 600Ω to 600Ω permalloy Audio Transformer Measured Frequency Response 20Hz~999KHz -1.6DB (Color : Gold)

Audio Transformers600: 600 Permalloy audio transformer measured frequency response 20Hz~999KHz -1.6DB600: The 600 audio signal isolation transformer is wound with a German permalloy iron core.Transformer plus iron-plated copper shielding and double-sided circuit boardPermalloy material has a low initial magnetic permeability and can operate with weak signals of a few tenths of a volt. It has extremely high magnetic permeability and extremely low iron loss. It is very suitable for coupled transmission of signals. preferred.Double-panel size: 65X48mm Shield size: 30x28x20mm Iron-plated copper paint process.This 600:600 transformer can be used as a passive preamp, single-ended to single-ended, single-ended to balanced, balanced to balanced, and balanced to single-ended. Easy to use, marked on the terminal board. A schematic diagram of the four uses is as follows:You can also customize 600:10K, 600:60K, 600:20K, 600:15K, 10K:10K, 10K:20K, 10K:90K, 20K:20K, 10K:600, etc.If you need a wiring diagram, please contact customer service.600: 600 transformer parameters:The primary inductance is about 19H to 25H.The secondary inductance is about 19H to 25H.The primary and secondary inductance errors are nearly identical, both less than 1% (the inherent discrete nature of inductors).The primary copper resistance is about 1.01KThe secondary copper resistance is about 1.01K.The error of primary and secondary resistance is less than 2% and almost the same (inherent error of enameled wire copper resistance).Transformer signal current exceeds 20mA.Measured frequency response: 20Hz~999KHz -1.6DB Amazing high frequency!

• Audio Transformers