Oil Extractor, Multi-Use Siphon Fuel Transfer Pump Kit，oil sampling pump kits，include tube，bottle，O-rings

Instructionsfor Sample CollectorNote:When using the Sample Collector, keep the sampling bottle upward (the oil maybe pumped into the Sample Collector if the bottle is put upside down.)1.Remove the cover of the sampling bottle and connect with the sampler at itsthreaded end.2.Loosen the large silver white screw on the top of the sampler and insert thesampler through the middle hole of the screw until its end aligned with thethread of the bottle (Do not insert too deep as the oil may be pumped into thesampler as the pipe is submerged in the oil.) 3.Tighten the large screw on the top of the Sample Collector 4.Insert the pipe end which is outside into the sample. 5.Pull and push the handle at the end of the sample to pump the oil into thesampling bottle until the liquid level reaches 3/4 of the bottle volume. 6.Remove the sampling bottle, cover it and stick a label on it (The label shouldcontain sampling time, oil sample No., oil sample name, equipment, using timeand operator).7.Pull out the sampling tube and clean the Sample Collector Sample CollectorPacking Including:1*negativepressure pumping unit1*disposablehose length is 1.3ft1*Samplingbottle 180 ml / 6 oz

• The Yateks sampler set uses a negative pressure suction pump, with a disposable non-polluting sampling tube and sampling bottle, to effectively isolate pollution. The oil liquid won't touch and contaminate the pump Internal wall, and there is no need to clean the pump between uses.Only to change hose and bottle.
• The oil sampler is made of special materials, and the surface is galvanized and anti-rust treated.
• Please read the product description before use.